Powering India — Alpine Inside
Electrical steel laminations and precision motor stampings
We have made laminations and stampings from electrical steel at Daman since 1997.
A steel service centre for CRGO and CRNO
Alpine Electrotech slits CRGO and CRNO to the width you specify, from mother coil up to 1250 mm.
- Mother coil
- Up to 1250 mmSlit to your requirement.
- Burr
- Under 10 microns
- Width tolerance
- +0 / −0.1 mm
- Packing
- Banded, labelled and palletised
What we do
Markets served
Alpine Electrotech supplies seven markets from its works at Daman. Each card opens the page for that market.
CRGO, CRNO, CRCA · 0.20–0.65 mm
Transformers
E&I laminations, strip laminations, T&U cores and cut-to-length transformer laminations.
Read moreCRNO, CRCA, CRGO · 0.35–1.00 mm
Motors, fans and appliances
Stator and rotor stampings, and pump and fan laminations, against a repeat schedule.
Read moreCRNO, CRCA · 0.50 mm
Mixer-grinder motors
Universal-motor stampings on tungsten carbide tooling, across the standard design range.
Read moreCRNO, CRCA · 0.35–1.00 mm
EV and automotive
Rotor and stator laminations, including skewed stacks and segmental sets.
Read moreCRNO, CRCA · 0.35–1.00 mm
Stepper, DC and specialty motors
Small-batch and to-drawing stampings where the tooling has to suit one part.
Read moreCRGO, CRNO, CRCA · 0.23–0.50 mm
UPS, inverter and solar
Small E&I laminations, T&U cores and reactor laminations.
Read moreCapability at a glance
The figures a sourcing engineer asks for first.
- Power presses
- 10 T to 220 T
- Cut-to-length
- Up to 300 mm width for rectangular strips with holes as required
- Tooling
- Progressive, with auto-stack and auto-skewTungsten carbide or high-speed steel, to suit the part. Designed on your drawings and inspected by us.
- Grades
- CRGO, CRNO, CRCA
- Thicknesses
- 0.20 mm to 1.00 mm