Skip to content

Products

Cut-to-length transformer laminations

Alpine Electrotech cuts transformer laminations to length in CRGO and CRNO, up to 300 mm wide and with holes as required, on its own cut-to-length line at Daman, India.

Specification

Grades
CRGO, CRNOCRGO: Grain-oriented electrical steel for transformer cores. CRNO: Non-oriented electrical steel for rotating machines.
Thicknesses
0.20 mm to 0.65 mm
Width
Up to 300 mm
Coatings
C3, C5, C6
Sold by
By weight (kg)

The thicknesses and coatings available for a given part depend on the grade. We confirm availability for your part at enquiry.

How it is made

Alpine Electrotech cuts transformer laminations to length up to 300 mm wide, with holes as required, on its own cut-to-length line at Daman.

The press shop at Daman runs this cut-to-length line alongside power presses from 10 T to 220 T.

The whole run, from material selection to packing, is set out under how a coil becomes a packed lot.

Which markets take it

Inspection and documents

What we check, and when

Common questions

How wide can you cut to length?
Alpine Electrotech cuts transformer laminations to length up to 300 mm wide, with holes as required, on its own cut-to-length line at Daman.
Do you supply a mill test certificate?
Yes. The source mill’s test certificate goes out with every despatch from Alpine Electrotech as a matter of course, not on request.
What documents come with a despatch?
Every despatch from Alpine Electrotech carries the source mill’s test certificate and a finished-goods inspection report, raised per lot. Lot identity is maintained through packing.

Other products

Every product in one list

Request a quotation

What do you need? *
See the E&I chart

Up to 10 MB. .pdf, .dwg, .dxf, .step, .stp, .igs, .iges, .png, .jpg, .jpeg, .zip.

We reply within two working days.

We use what you send only as set out in our Privacy policy