Products
CRGO and CRNO slit coils
Alpine Electrotech slits CRGO and CRNO to the width you specify, from mother coil up to 1250 mm, on its own slitting line at Daman, India. Slit width is held to +0 / −0.1 mm and the slit edge is checked for burr, under 10 microns, before the coil is released.
Specification
- Grades
- CRGO, CRNO, CRCACRGO: Grain-oriented electrical steel for transformer cores. CRNO: Non-oriented electrical steel for rotating machines. CRCA: Cold-rolled close-annealed steel for non-electrical parts of an assembly.
- Mother coil
- Up to 1250 mmSlit to your requirement.
- Width tolerance
- +0 / −0.1 mm
- Burr
- Under 10 microns
- Coatings
- C3, C3L, C4, C5, C5L, C6, C6L
- Sold by
- By weight (kg)
The thicknesses and coatings available for a given part depend on the grade. We confirm availability for your part at enquiry.
How it is made
Alpine Electrotech slits CRGO and CRNO to the width you specify, from mother coil up to 1250 mm, on its own slitting line at Daman. Every coil is held to the same width tolerance and burr limit, and packed to travel.
A width is a setup rather than a stock item: tell us the width you need and we cut it, and the slit edge is checked for burr before the coil is released.
The steel is bought direct from the mills, and the source mill's test certificate goes out with every despatch. Coils leave banded, labelled and palletised.
Which markets take it
- Transformers
E&I laminations, strip laminations, T&U cores and cut-to-length transformer laminations.
- Motors, fans and appliances
Stator and rotor stampings, and pump and fan laminations, against a repeat schedule.
- UPS, inverter and solar
Small E&I laminations, T&U cores and reactor laminations.
Inspection and documents
Common questions
- What widths do you slit to?
- Alpine Electrotech slits CRGO and CRNO to the width you specify, from mother coil up to 1250 mm wide, on its own slitting line at Daman. A width is a setup rather than a stock item. Slit width is held to +0 / −0.1 mm and the slit edge is checked for burr, under 10 microns, before the coil is released.
- Which coatings can you supply?
- Alpine Electrotech supplies C3, C3L, C4, C5, C5L, C6 and C6L coatings. The coatings available for a given part depend on the grade and the source mill, and we confirm them at enquiry.
- Do you supply a mill test certificate?
- Yes. The source mill’s test certificate goes out with every despatch from Alpine Electrotech as a matter of course, not on request.
- Is the material traceable back to the mill?
- Yes. Alpine Electrotech records coil and heat identity at goods-in and carries it through slitting, stamping and packing, so a finished lot can be traced to the coil and the heat it came from.